MECAIR MPS and MPS PR 1/4"

คุณสมบัติสินค้า:

SKU : MPS

The economist model"MCS" uses advanced microprocessor technology, expressely designed to control the interval and the pulse time of diaphragm valves using the DP and focusing on reverse pulse-jet systems with pneumatic cleaning procedures. All the technical characteristics satisfy the "CE" Directives which relate to isolation and low voltage power. The European Regulation 89/336 EEC and 93/68 EEC

Share

หมวดหมู่ : Brand Mecair

แบรนด์ : MECAIR

Share

MECAIR MPS and MPS PR 1/4"

Description

The Model “MPS” has been designed to guarantee the control of diaphragm valves mounted on pulse-jet dust collector filters containing filter bags or cartridges. The main function of the MPS is to ensure the filter is cleaned only when it exceeds the set ΔP. All the technical characteristics comply with the CE Directive. The MTS-PR¼″ conforms to the European Directive (89/336 EEC and 93/68 EEC).

Upon request it is possible to supply the unit in accordance to the European Directive EC/94/9 ATEX, ATEX II 3D (zone 22).

The MPS sequencer is available in the following versions: MPS4, MPS8, MPS12, MPS16

The MPS unit visualises all the values set, via a digital display (Operating ΔP, pulse time, pause time, number of shut-down cleaning cycles).

The pause time used when in shut‑down cleaning mode is the same as the pause time set when in manual mode.

The MPS unit also has the “PRECOATING” function, which allows the user to set a higher value of ΔP than normally required. (This is normally possible only once when the filter is new or when the filtering elements are new.)

This function is used in filters where it is necessary to ensure that the filtering elements absorb special reagents which act as a further protection. By setting a higher ΔP value (Precoating ΔP value), it allows the filtering elements to properly absorb the reagents injected into the filter. Once the Precoating ΔP value has been reached, the pulsing will commence and will cease once it reaches the normal operating DP value. This value will no longer be considered in the normal functioning of the filter.

MAIN FEATURES

• Operates in MANUAL or AUTOMATIC (ΔP) mode
• Automatic start-up of cleaning cycle according to set ΔP
• SHUT-DOWN CLEANING with selectable number of cleaning cycles
• PRECOATING function for new filters or filters equipped with new filtering elements
• REMOTE function
• ALARM contact enabling connection to external alarms
• HOUR COUNTER
• ΔP value playback (option)
• 4–20 mA ΔP output (optional)

GENERAL CHARACTERISTICS
FluidsAir dry and oil free
Air inlet¼″ Gas
Operating pressureFrom 0,5 to 7,5 bar
Exhaust1 8″ Gas
  
CONSTRUCTION CHARACTERISTICS
Pilot bodyBrass
PilotBrass
Lock nutZinc plated
O-ringNBR

 

Downloads
  MECAIR MPS and MPS PR  1/4"

 

 

ขอใบเสนอราคา Click

 
 
 
 
Powered by MakeWebEasy.com
เว็บไซต์นี้มีการใช้งานคุกกี้ เพื่อเพิ่มประสิทธิภาพและประสบการณ์ที่ดีในการใช้งานเว็บไซต์ของท่าน ท่านสามารถอ่านรายละเอียดเพิ่มเติมได้ที่ นโยบายความเป็นส่วนตัว  และ  นโยบายคุกกี้