Series M-22
electrically operated 3/2-way, 5/2-way and 5/3-way, nominal size 14 mm, G1/2
BCFDR70
MP - Guardsman II Modular Integral Filter and Regulator 1/4, 3/8 and 1/2 (BCFDR70)
2509
The cable plug Type 2509 is used to connect devices and components, especially solenoid valves with plugpin assignment A according to ISO 4400.
SE32
Compatible with Inline sensor-fitting S030 with paddle wheel for flow measurement (see datasheets types 8032, S030)
3280
The direct-acting motor valve of Type 3280 is used for dosing of liquids and gases in closed or open control loops.
8200
The holder range for 120 mm analytical probes (pH/redox potential (ORP)/ conductivity) covers many types of applications.
CF5AR350
MP - (CF5AR350 Series) Modular Integral Filter and Regulator 1/4, 3/8, 1/2
2300
In line with Bürkert’s philosophy for modular valves and sensors the construction of Type 2300 angle-seat valve fulfils tough criteria for process environments.
SE35
The Type 8035 flowmeter is specially designed for use in neutral, slightly aggressive, solid free liquids.
Series KN-05
Series KN-05, KN-55 NAMUR, electrically operated 3/2-way, 5/2-way and 5/3-way, nominal size 6 mm, G1/4
2513
Plug-in connection with fixed moulded cable for connecting electrical components acc. to DIN EN 175301-803.
1087
Digital version with bright LED display, Analogue version with LED illumination to indicate switching status
5411
Type 5411 is a pilot operated 3/2-way solenoid valve with manual override as standard.
2751A9011
ROSS 27 Series valves are not designed as control valves for air clutch/brake mechanisms on mechanical power presses, and must not be installed for such use.
6519
In line with Bürkert’s philosophy the construction of the type 2301 globe valve fulfils tough criteria for process environments.
2301
In line with Bürkert’s philosophy the construction of the type 2301 globe valve fulfils tough criteria for process environments.
2012
The externally piloted globe valve consists of a pneumatically operated piston actuator and a 2/2-way valve body.
1605
The purpose of producing a rodless cylinder is to provide a space saving option over conventional cylinders.
XLISO15552
Double acting Al-profile cylinder with integrated sensor grooves. Also available in explosion proof design, in a low-temperature version (XLC), with ice remover (XLC), with dirt remover (XLD), in a high temperature (XLH)
5500A3013
Reduces exhaust noise , Diffuses exhausting air , Back pressure, minimal , Typical impact noise reduction is in the 20-25 dB range
8697
The pneumatic control unit Type 8697 is designed for decentralised automation of process valves ELEMENT Type 21xx.
8690
The pneumatic control unit Type 8690 is designed for decentralised automation of ELEMENT Type 21xx pneumatic process valves.
8695
The control head Type 8695 is designed for decentralized automation of ELEMENT Type 21xx pneumatic process valves with smaller orifice.
8791
Compact positioner for integrated mounting on pneumatically operated process valves. Remote setpoint adjustment via a 4-20 mA signal.
8696
Compact positioner for integrated mounting on pneumatically operated process valves. Remote setpoint adjustment via a 4-20 mA signal.