SC Series Vibrating Probe Level Switch

รหัสสินค้า : SC Series

The Finetek vibrating probe switch is highly versatile and can be used for most almost any bulk solid application.

หมวดหมู่ : Fine-Tek

Share

รายละเอียดสินค้า

SC Series Vibrating Probe Level Switch

The Finetek vibrating probe switch is highly versatile and can be used for most almost any bulk solid application. This includes level detection of almost any granular, sandy, chip like, foodstuff, grain or powdery materials. The operating principle is based on the changes of vibration frequency of the tuning fork when it comes into contact with a liquid or solid material.. The Vibrating probe contains piezoelectric crystals built into the vibration tube that produce vibrations/resonations at specific frequencies. One element acts as a transmitter of the signal and the other receives the signal and converts it to electrical output. When the Vibrating probe comes in contact with material the vibration is weakened/dampened and results in a frequency change which triggers the switch. It’s ideal for applications where: the dielectric constant is low (where capacitance level switches can’t be used) ; when material moisture content changes easily; low viscosity liquids; there is a combination of differing materials in the container/tank. The Vibrating probe provides a reliable & maintenance-free means of process control for bulk solids. Easy mounting at almost any angle and basic calibration procedures will provide reliable functioning and less required monitoring. This device can withstand tough lateral loads and static electricity. Furthermore, it eliminates the application issues associated with jamming and clogging between tines on a ‘tuning fork’ device Also; it is equipped with a Fail-safe that prevents malfunctioning caused by power cuts.

Features

  • Voltage supply range 20~250, 50~60Hz Vac/ Vdc.
  • SPDT Relay output, SSR MOSFET output.
  • Sensitivity adjustment is available for different density mediums.
  • Low wear and tear, maintenance free and self cleaning.
  • Fine powders can be detected.
  • Euro and UL certified Models available.

 

applications

Solid Level Detection

  • Powders : Powdered milk, flour, spices, coffee beans, coffee powder, tea, salt, sugar, grains, chocolate Tobacco, powdered cellulose, powdered clay, polystyrene powder, dry soot, soda ash, coal ash
  • Granular & plastics : Gravel, glass fine power, granular plastics, foundry sand, cements, plastic pellets
  • Chip or pellet like : Frozen potato chips, beans, peanuts, sweets and candy, animal / pet food Wood shavings, chalk, steering chips, styrofoams, charcoals


DOWNLOAD CATALOG :  SC Series Vibrating Probe Level Switch

 

ขอใบเสนอราคา Click

 
 
 
 

สินค้าเกี่ยวข้อง

SA Series

The Fine-tek Capacitance Switch for liquids and solids can be used in mediums such as liquids, pastes, syrups, powders, granules, flakes and chips.

SE Series

The SE series operating principle is simple. A unit is usually located through a bin wall at the top, middle or low level of a bin. During normal operation (no material present) a synchronous motor rotates the paddle at 1 RPM. When this paddle rotation is impeded by material, surroanding the paddle, motor will stall and cause the Micro switch to change state. (indicating an alarm or control) Product Introduction

FA/FB Series

The FA/FB Series is a cable float level switch product line constructed from a variety of chemical resistant materials. These are durable, low-cost, simple and easy-to-use float level switches equipped with either a microswitch, reed switch or mercury switch output.

SIS Sanitary

Used for high, low position alarm in production process tank or pipelines.The compact design to facilitate carrying and transporting, and can be quickly installed even in the area of narrow space or difficult operation.

สินค้าที่เคยเข้าชม
ยังไม่เคยเข้าชมสินค้า
Powered by MakeWebEasy.com