BURKERT TYPE 2836 - Direct-acting 2-way Solenoid Control Valve

รหัสสินค้า : 2836

The direct-acting solenoid control valve Type 2873 is used as the regulating unit in control loops.

หมวดหมู่ : Burkert Process & Control Valves



BURKERT TYPE 2836 - Direct-acting 2-way Solenoid Control Valve

Proportional valve (PWM Valve) type 2836, 2861, 2863, 2865, 2871, 2873, 2875, 6024 ซึ่งใช้ร่วมกับ Type 8605 ซึ่งเป็นอิเลคโทรนิคคอนโทรลยูนิต ซึ่งทำหน้าที่ Convert สัญญาณ Analog เป็นสัญญาณ PWM

The direct-acting proportional valve Type 2836 works as an electromagnetically actuated control valve in applications with relatively highflow rates. The valve is normally closed.

  • For high flow rates
  • Direct-acting, normally closed
  • Operating pressure 0 ... 25 bar
  • Orifice sizes 3.0 ... 12 mm
  • Port connection 1/2” and 3/4”


Circuit function A

2/2 way direct-acting, solenoid proportional control valve

Valve control takes place through the control electronics of Type 8605, which converts an analogue input signal into a PWM) (pulsewidth modulation) signal.

Further, functional features of the Type 8605 electronic control unit:

  • Temperature compensation for coil heating by internal current regulation
  • Simple zero and span settings
  • Ramp function to dampen fast status changes
  1. Pressure data [bar]: Overpressure with respect to atmospheric pressure
  2. PWM pulse-width modulation
  3. Characteristic data of control behaviour depends on process conditions

Dimensions [mm]

Characteristics of a solenoid control valveAdvice for valve sizing

Determination of the kV value

Type 2836 Can be combined with

 Type 8605 - PWM control electronics for electromagnetic...
 Type 2518 - Cable Plug DIN EN 175301-803 - Form A
 Type 8611 - eCONTROL - Universal controller

*For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.

ต้องการ : Data Sheet สินค้า กรุณา แอดไลน์ @flutech แล้วแจ้งรุ่นที่ต้องการ

ขอใบเสนอราคา Click!!




The control head Type 8695 is designed for decentralized automation of ELEMENT Type 21xx pneumatic process valves with smaller orifice.


The pneumatic control unit Type 8697 is designed for decentralised automation of process valves ELEMENT Type 21xx.


The compact process controller Type 8693 is optimized for integrated mounting on the pneumatic actuators in the process valve series Type 23xx/2103 and is specially designed for the requirements of a hygienic process environment.


The pneumatic control unit Type 8690 is designed for decentralised automation of ELEMENT Type 21xx pneumatic process valves.

Powered by MakeWebEasy.com