The direct-acting solenoid control valve Type 2873 is used as the regulating unit in control loops. Due to an elastomeric seat seal the valve closes tight (integrated shut-off function), up to the DN specific nominal pressure. The plunger of the valve is assembled frictionless, which leads to an extraordinary adjustment characteristic. This valve is particularly suitable for demanding control tasks (high control range, dry gases, etc.).
Circuit function A
|2/2 way direct-acting, solenoid proportional control valve|
Valve control takes place through a PWM signal1). The duty cycle of the PWM signal determines the coil current and hence the position of the plunger. Optionally the valve can also be driven with DC voltage.
Please note the sizing comments for such a control valve on after
|Characteristics of a solenoid control valve||Advice for valve sizing|
Determination of the kV value
Type 2873 Can be combined with
|Type 8605 - PWM control electronics for electromagnetic...|
|Type 2518 - Cable Plug DIN EN 175301-803 - Form A|
|Type 8611 - eCONTROL - Universal controller|
*For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.
ต้องการ : Data Sheet สินค้า กรุณา แอดไลน์ @flutech แล้วแจ้งรุ่นที่ต้องการ