All

Series-01VS

AIGNEP - Series 01VS - SOLENOID PILOT VALVE

2509

The cable plug Type 2509 is used to connect devices and components, especially solenoid valves with plugpin assignment A according to ISO 4400.

SE32

Compatible with Inline sensor-fitting S030 with paddle wheel for flow measurement (see datasheets types 8032, S030)

3280

The direct-acting motor valve of Type 3280 is used for dosing of liquids and gases in closed or open control loops.

8200

The holder range for 120 mm analytical probes (pH/redox potential (ORP)/ conductivity) covers many types of applications.

55130

AIGNEP Series 55130 - ELBOW CONNECTOR

50600

AIGNEP - Series 50600 - MALE ADAPTOR PARALLEL

CF5AR350

MP - (CF5AR350 Series) Modular Integral Filter and Regulator 1/4, 3/8, 1/2

55000

AIGNEP Series 55000 | STRAIGHT MALE ADAPTOR “UNIVERSAL SHORT”

2300

In line with Bürkert’s philosophy for modular valves and sensors the construction of Type 2300 angle-seat valve fulfils tough criteria for process environments.

SE35

The Type 8035 flowmeter is specially designed for use in neutral, slightly aggressive, solid free liquids.

Series KN-05

Series KN-05, KN-55 NAMUR, electrically operated 3/2-way, 5/2-way and 5/3-way, nominal size 6 mm, G1/4

2513

Plug-in connection with fixed moulded cable for connecting electrical components acc. to DIN EN 175301-803.

1087

Digital version with bright LED display, Analogue version with LED illumination to indicate switching status

5411

Type 5411 is a pilot operated 3/2-way solenoid valve with manual override as standard.

2751A9011

ROSS 27 Series valves are not designed as control valves for air clutch/brake mechanisms on mechanical power presses, and must not be installed for such use.

6519

In line with Bürkert’s philosophy the construction of the type 2301 globe valve fulfils tough criteria for process environments.

2301

In line with Bürkert’s philosophy the construction of the type 2301 globe valve fulfils tough criteria for process environments.

2012

The externally piloted globe valve consists of a pneumatically operated piston actuator and a 2/2-way valve body.

1605

The purpose of producing a rodless cylinder is to provide a space saving option over conventional cylinders.

XLISO15552

Double acting Al-profile cylinder with integrated sensor grooves. Also available in explosion proof design, in a low-temperature version (XLC), with ice remover (XLC), with dirt remover (XLD), in a high temperature (XLH)

5500A3013

Reduces exhaust noise , Diffuses exhausting air , Back pressure, minimal , Typical impact noise reduction is in the 20-25 dB range

Powered by MakeWebEasy.com
เว็บไซต์นี้มีการใช้งานคุกกี้ เพื่อเพิ่มประสิทธิภาพและประสบการณ์ที่ดีในการใช้งานเว็บไซต์ นโยบายความเป็นส่วนตัวและคุกกี้