27 มี.ค. 2562
Type 5406 valves are pilot-controlled solenoid valves with servo pistons. Depending on the version, these valves can be used either as feed line or circulation valves. The valves fulfill the requirements of a safety shut off valve according to DIN EN 23553-1. It is approved by TÜV-Süd and certified by DIN Certco. The universal coil system reduces logistics and service expenses.
19 มี.ค. 2562
Air Distribution manifolds provide individual control on machinery with multiple pneumatic circuits. Mechanical presses may have clutch/brake, counterbalance, die cushion, mechanical devices and automation valves circuits. Air distribution manifolds allow centralized independent pressure control as well as independent lockout points for each circuit.
4 ก.พ. 2562
ช่วงเทศกาลตรุษจีนปี 2562 ห้างสรรพสินค้าทั้ง โรบินสัน เซ็นทรัล เดอะมอลล์ จัดกิจกรรมและแคมเปญต่างๆ คึกคัก ด้านท็อปส์และซีพี เฟรชมาร์ท พร้อมให้บริการชุดของไหว้...
25 ธ.ค. 2561
The electronics Type SE56 (blind in compact version or with display in compact or remote version) connected to the magnetic flow sensor fitting Type S051, S054, S055 or S056 is designed for applications with liquids with a minimum conductivity of 5 μS/cm.
22 ธ.ค. 2561
The Inline flow sensor/switch Type 8010 is specially designed for use in pure and water resembling fluids, free from air bubbles and magnetizable particles, to monitor minimum/maximum values of flow.
20 ธ.ค. 2561
The fitting can be used to connect any Insertion device for a measurement in the pipe. e.g. for flow, pH, oxidation reduction potential (O.R.P) and conductivity measurement.
18 ธ.ค. 2561
The sensor-fitting S030 has a built-in paddle wheel to measure the flow rate. When liquid flows through the pipe, the paddle wheel is set in rotation producing pulses which frequency is proportional to the flow rate
14 ธ.ค. 2561
The complete full bore magflowmeter Type 8056, which consists of a magnetic sensor fitting Type S056 connected to an electronics Type SE56 (blind in compact version or with display in compact or remote version) is designed for applications with liquids with a minimum conductivity of 5 μS/cm.
13 พ.ย. 2561
The robust and compact positioner is designed to standardisation acc. to IEC 60534-6-1 or VDI/VDE 3845 (IEC 60534-6-2) for assembly with linear and rotary actuators. In addition, the remote version with the displacement position sensor can be combined with Bürkert process control valves.
13 พ.ย. 2561
Manually-operated angle-seat valve of the type series 2000/2702 are delivered as standard with threaded or weld end port connection. Type 2000 with manual actuator without position indicator is used only for On/Off function.