Process & Control Valves

In line with Bürkert’s philosophy for modular valves and sensors the construction of Type 2300 angle-seat valve fulfils tough criteria for process environments.

Plug-in connection with fixed moulded cable for connecting electrical components acc. to DIN EN 175301-803.

Digital version with bright LED display Analogue version with LED illumination to indicate switching status

Type 5411 is a pilot operated 3/2-way solenoid valve with manual override as standard.

In line with Bürkert’s philosophy the construction of the type 2301 globe valve fulfils tough criteria for process environments.

In line with Bürkert’s philosophy the construction of the type 2301 globe valve fulfils tough criteria for process environments.

The externally piloted globe valve consists of a pneumatically operated piston actuator and a 2/2-way valve body.

The pneumatic control unit Type 8697 is designed for decentralised automation of process valves ELEMENT Type 21xx.

The pneumatic control unit Type 8690 is designed for decentralised automation of ELEMENT Type 21xx pneumatic process valves.

The control head Type 8695 is designed for decentralized automation of ELEMENT Type 21xx pneumatic process valves with smaller orifice.

Compact positioner for integrated mounting on pneumatically operated process valves. Remote setpoint adjustment via a 4-20 mA signal.

Compact positioner for integrated mounting on pneumatically operated process valves. Remote setpoint adjustment via a 4-20 mA signal.

The compact process controller Type 8693 is optimized for integrated mounting on the pneumatic actuators in the process valve series Type 23xx/2103 and is specially designed for the requirements of a hygienic process environment.

The digital control electronics Type 8605 are used to operate proportional solenoid control valves in a power range from 40-2000 mA....

The direct-acting proportional valve Type 6024 works as an electromagnetically actuated control valve with relatively high flow rates at low operating pressures. The valve is normally closed...

The direct-acting solenoid control valve Type 2875 is used as the regulating unit in control loops...

The direct-acting solenoid control valve Type 2871 is used as the regulating unit in control loops...

Type 2865 is an extremely compact solenoid control valve and is available with an orifice up to 4mm. It is based on the standard version of Type 2875....

Type 2863 is an extremely compact solenoid control valve and is available with an orifice up to 4mm. It is based on the standard version of Type 2873..

Type 2861 is an extremely compact solenoid control valve and is available with an orifice up to 2mm. It is based on the standard version of Type 2871....

The direct-acting solenoid control valve Type 2873 is used as the regulating unit in control loops.

The direct-acting solenoid control valve Type 2873 is used as the regulating unit in control loops.

The Bürkert 3/2 way seat valve, Type 2106, consists of a pneumatically operated ELEMENT actuator and a 3 way stainless steel valve body....

The globe valve Type 2101 is specially optimised for decentralised process automation and fulfils tough criteria for process environments....

The Bürkert Tank Bottom Valve Type 2105 is designed for control of ultra pure, sterile, aggressive or abrasive fluids...

The Bürkert Zero dead volume T-Valve Type 2104 is designed for control of ultra pure, sterile, aggressive or abrasive fluids...

The externally piloted diaphragm valve type 2103 consists of a pneumatically operated piston actuator, a diaphragm and a 2-way valve housing made of cast stainless steel...

The Burkert Zero Deadleg T Valve is designed for control of ultra pure, sterile, aggressive or abrasive fluids...

Pilot controlled diaphragm valve with pneumatically operated piston actuator and valve body from cold-formed stainless steel pipe. Actuator from PA or PPS.

2/2- and 3/2-way stainless steel ball valve used to shut off and distributing medium flows....